Blog

Nov 05, 2024

Feedback Sports RAKK 2.0 E Storage Stand Review

Even when considering e-bikes with kickstands, a significant amount of storage space can be wasted by the bike’s natural sideways lean. If your apartment or garage is already a tight fit, you may want

Even when considering e-bikes with kickstands, a significant amount of storage space can be wasted by the bike’s natural sideways lean. If your apartment or garage is already a tight fit, you may want to consider a storage option that takes up less space.

Feedback Sports produces a variety of storage options, including the e-bike-specific Rakk 2.0 E storage stand, to keep your bike(s) stable and organized.

The Rakk 2.0 E features a steel base with a small footprint, a V-shaped wheel slot, and a spring-loaded swing arm with an adjustable wheel pulley. It can hold e-bikes weighing up to 75 lbs with wheels ranging from 20”-29” in diameter (and technically even 16” with an optional adapter). It can also accommodate tires from 23mm to 4.5” wide!

A charger can be secured to the stand on a textured tray with a velcro strap to make recharging an e-bike easier. The Rakk 2.0 E also comes with two magnetic attachments with zip-tie slots to connect and route cables, keeping them clean and above the floor.

We tested the Feedback Sports Rakk 2.0 E Storage Stand to see if it lived up to the hype. Continue reading below to learn more about it!

The stand can accommodate light or heavy e-bikes with large or small wheels and slim or fat tires equally well.

The two magnets can be attached to any part of the stand to route cables as needed.

The spring-loaded swing arm and wheel pulley adjust automatically to hold the bike’s wheel properly.

The wheel pulley can be mounted in one of three configurations; the lowest is intended for bikes with 20” wheels, the second fits 22”-26” wheels, and the third accommodates e-bikes with 27.5”-29” wheels. To change the pulley’s position, a bolt needs to be removed and a guide on the swing arm aligned with the intended configuration before reattachment.

Once installed, a charger can be secured to the charger tray with an included velcro strap. Grip tape is provided to help keep it in place, though it seemed to work best on chargers with rubber feet. The RAKK 2.0 E includes two magnets that can be attached to charging cables with zip ties and then mounted to the stand itself as desired.

All in all, I thought the process was simple, and an assembly guide video is available on the RAKK 2.0 E’s FAQ page on Feedback’s website. A quick-release mechanism would make changing the wheel pulley’s position easier, but assuming that most users will use the RAKK for a single bike, it should not be a significant concern.

I tested the RAKK with a selection of e-bikes with as much variation in weight, wheel size, and tire width as possible. This included models weighing between roughly 40 lbs to 85 lbs (which, to be clear, is beyond the stand’s advertised weight capacity). I also tested bikes with 20-29” wheels and tires ranging from 40mm to 4.5” in width.

In all cases, the stand felt stable and held each bike securely. With the charger in place, there was inevitably some portion of its length to manage when not connected to the bike, but the magnetic cable attachments were an effective solution for routing the cables.

Once the tray, the charger, and the bike were in place, the stand felt like a true charging station instead of simply a parking spot.

The RAKK 2.0 E isn’t just a stand or parking space; it’s a portable, practical charging station.

In its flat state, the stand measures approximately 17.5” W x 20.625” L x 4.5” H (at the wheel pulley).

Overall, the process is straightforward, but I found the release pin on the bottom of the arm to be somewhat difficult to use. I would have preferred a more robust release mechanism with easier access, but the process got easier with repeated use.

We liked the RAKK 2.0 E’s size, stability, and overall functionality. Its base measures approximately 17.5” x 20.625”.

A combination of grip tape and a velcro strap keep a charger held securely in place.

Like the stand’s wheel pulley, its wheel slot is V-shaped to accommodate a variety of tire sizes.

The stand is functional, sturdy, simple to use, and generally well-designed, though not without its flaws. It seems best when set up and left in place instead of being collapsed and unfolded again regularly, but that also makes sense with its included charger tray and cable routing magnets. All in all, we give it two thumbs up!